Advertisement
Forum | Frame Series | Stem Mounting
Installation
1
Mount remote driver box to structure with in 50' from fixture. Run
wires from driver box to junction box.
2
Thread fixture wires through stem, canopy, cross bar, and thread
stem into fixture.
3
Turn off the power to the fixture's circuit. Support the fixture
at the junction box and connect the wires from the fixture to the
junction box.
COMPONENTS FOR STEM MOUNTING
The Frame series stem mounting system consists of two main
components: the stem canopy assemblies (A) and the remote mount
driver box (B). Both items come shipped with the fixture to help ensure
proper counts and clarification during assembly.
In preparation of installation, ensure that crossbars, canopy covers,
and stems are all accounted for. Be sure to follow all governing code
related to wiring, structural integrity, and use of materials.
A
4
Mount cross bar to junction box and lift canopy and lock nut into place.
4
Installation Guide
A
B
Advertisement
