Samsung RL60GG Series Service Manual page 26

3. DISASSEMBLY & REASSEMBLY
PART NAME
Disassembly
of the
refrigerator
door
FIGURE
26
DESCRIPTION
5. Disassemble the COVER WIRE DOOR on
the top of the fridge door with a flathead
screw driver by putting it into the indicated
position().
Be careful not to scratch.
6. Disjoin the COVER WIRE HINGE R from the
ASSY HINGE UPP as shown. Take out the
electric wire from the COVER WIRE HINGE R.
7. With 11mm wrench, separate the HINGE
SHAFT and then flip the HINGE and reattcah
the HINGE SHAFT.
8. Take out the COVER WIRE HINGE L from the
underneath the COVER HINGE A.
Switch the position DOOR SWITCH and the
GROMMET HINGE. And then switch the
direction of the electric wire as below.
9. After rejoining the COVER WIRE HINGE L
and the ASSY HINGE UPP and switching the
position of the GROMMET HINGE and the CAP
SPACE DOOR, reposition the ASSY HINGE
UPP and assemble the COVER WIRE DOOR
as shown. (The electric wire should be inside of
the COVER WIRE DOOR.)
10. Switch the position of the STOPPER DOOR
and the BRACKET STOPPER DOOR and the
GROMMET HINGE as shown.