Table of Contents
Advertisement
Operating precautions
■
When transporting this product
Do not apply excessive vibrations or impacts during
transport.
Doing so may damage the internal parts, resulting in a
malfunction.
■
To ensure a stable performance in the long
term
Using the unit for prolonged periods in locations where
the temperature and humidity levels are high will cause
its parts to deteriorate, resulting in a reduction of its
service life.
(Recommended temperature: Max. 35 °C (95 °F))
Ensure that a cooling unit or heating unit will not blow
any air directly toward the installation location.
■
Operating temperature range
Avoid using the unit in cold locations where the
temperature drops below 0 °C (32 °F) or hot locations
where the temperature rises above 40 °C (104 °F) since
these temperatures downgrade the picture quality and
adversely affect the internal parts.
■
When storing the unit
Store indoors in a dry location.
■
When the unit is not in use
Turn off the unit's power when it is not in use.
When the unit is no longer going to be used, do not leave
it lying around, but be absolutely sure to dispose of it
properly.
■
Do not touch the optical system parts.
Under no circumstances must they be touched.
In the unlikely event that they have become dusty,
remove the dust by using a camera blower or by wiping
them gently with a lens cleaning paper.
■
Do not point the camera at strong lights.
When parts of the MOS sensor
are exposed to spotlights or
other strong lights, blooming (a
phenomenon where the edges
of strong lights become blurred)
may occur.
Bright subject
Blooming
English
5
Advertisement
Table of Contents
