Table of Contents
Advertisement
Operating precautions
■
What happens with high-brightness
subjects
Flare may occur if an extremely bright light source is
pointed at the lens. In a case like this, change the angle
or take some other remedial action.
■
Note regarding image distortion
Edges of the image will be distorted due to the
characteristics of the lens.
■
Do not point the camera directly at the sun
or a laser beam no matter whether it is
turned on or not.
Taking images of the sun, laser beams, or other brightly
lit subjects for prolonged periods of time may damage
the CCD.
■
Keep the unit away from water.
Do not splash water onto the product. Otherwise,
problems may occur.
■
Do not swing the main unit around.
6
English
Continued
■
It is not recommended to install upside
down.
■
Do not use at loud volumes over long
periods. Also check that the volume on the
PC is not too loud before connecting.
There is a danger of hearing damage. Furthermore, the
power turns on when you connect, and if a loud noise is
emitted, there is a danger of hearing damage.
■
Cleaning and maintenance
Ensure that you unplug the AC adaptor from the
outlet, then disconnect the power supply cable and
the USB cable before proceeding.
Gently wipe the surface of the case by using a soft
cloth to remove dirt.
●
To remove stubborn dirt or fingerprints, dampen a
cloth with diluted neutral detergent (1 part detergent to
100 parts water), wring out the cloth firmly, and then
wipe away the dirt. Finally, wipe away all the moisture
with a dry cloth.
●
If water droplets get inside the unit, operating
problems may result.
Advertisement
Table of Contents
