Table of Contents
Advertisement
3. Peel back the carpet to expose Model X's 4-pin
connector on the wiring harness.
4. Connect the pigtail connector to the vehicle wiring
connector.
WARNING: Towing increases your stopping
distance, even when the trailer is equipped with its
own braking system. When towing, increase your
following distance and avoid situations that could
potentially cause heavy braking. Failure to do so
can result in a collision.
Driving
Towing and Accessories
WARNING: Observe all regulations and legal
requirements in your regional and national
jurisdictions that apply specifically to trailer towing
and brake requirements. Many regions require a
breakaway switch, located on the tongue of the
trailer, to activate the trailer brakes in the event
that the trailer separates from the vehicle. Failure
to comply with regulations can compromise your
safety.
WARNING: Follow the instructions provided by the
trailer brake manufacturer to ensure that trailer
brakes are properly installed, adjusted, and
maintained. Tesla is not responsible for damages
caused by incorrect installation of trailer braking
systems.
WARNING: Never attempt to connect trailer brakes
directly to the vehicle braking system. Doing so
can cause damage to the vehicle and the trailer,
and can cause the braking system to malfunction,
resulting in serious injury or death.
Towing Guidelines
Model X is designed primarily as a passenger-carrying
vehicle. Towing a trailer puts additional load on the
motor(s), drive train, brakes, tires, and suspension and
significantly decreases range. If you decide to tow a
trailer, proceed with caution and follow these general
guidelines:
• Reduce your driving speed and avoid sudden
maneuvers. Keep in mind that when towing a trailer,
steering, stability, turning radius, stopping distance
and braking performance are different when
compared to driving without a trailer.
• Increase your following distance by maintaining at
least twice the distance from a vehicle ahead. This
helps to avoid situations that require heavy braking.
Sudden braking may result in skidding or jack-knifing,
and loss of control.
• Avoid sharp turns. Sharp turns can cause the trailer to
contact the vehicle and cause damage. Keep in mind
that the trailer wheels are closer to the inside of the
turn than the vehicle's wheels. Therefore, make wider
turns to prevent the trailer from hitting curbs, road
signs, trees or other objects.
• Periodically check the trailer lights and turn signals to
confirm that bulbs are still working. When towing a
trailer, the turn signal arrows on the vehicle
instrument cluster flash as normal, even if the bulbs
on the trailer are burned out.
• Periodically confirm the cargo is secure.
• Periodically confirm the trailer brakes are working.
• Avoid parking on a grade (see
on page
88).
• Regularly confirm that all towing components are
securely tightened.
Parking with a Trailer
87
Advertisement
Table of Contents
