Electrical Connection; Connecting The Water Hose To The Freezer - Beko BUFR2715PSIM User Manual

Installation
3.4.Electrical
connection
WARNING:
A
connect ons v a extens on
cables or mult -plugs.
WARNING:
B
cable must be replaced by the
Author zed Serv ce Agent.
If two coolers are to be
nstalled s de by s de, there
C
should be at least 1 5/8"
(4 cm ) d stance between
them.
• Our company shall not be l able
for any damages that w ll ar se
when the product s used
w thout ground ng and electr cal
connect on n accordance w th the
nat onal regulat ons.
• Power cable plug must be w th n
easy reach after nstallat on.
• Do not extens on cords or cordless
mult ple outlets between your
product and the wall outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with
high temperatures may
C
flow through these areas,
resulting in hot surfaces
on the side walls. This is
normal and does not need
any servicing. Please pay
attention while touching
these areas.
Freezer / User Manual
Do not make
Damaged power
11 / 20 EN
3.5. Connecting
the water hose
to the freezer
1. Remove the valve channel cover
(A) from the water nlet valve.
2. Connect the water l ne (C) to the
nlet valve (B) and t ghten by hand
to secure t. It s not necessary to
use pl ers, but f there s a leak, you
may t ghten sl ghtly w th a pa r of
pl ers.