GE Fuji Electric AF-300 Mini Startup Manual page 6

Maintenance and inspection and parts
replacement
WARNING
• Turn the power off and wait for at least five minutes
before starting inspection.
(Also check that the LED monitor is unlit, and
verify that the dc voltage across the P (+) and N (-)
terminals is lower than 25 Vdc.)
Otherwise, electric shock could occur.
• Maintenance, inspection, and parts replacement
should be made only by qualified persons.
• Remove watches, rings and other metallic objects
before starting work.
• Use insulated tools.
Otherwise, electric shock or injuries could occur.
Disposal
• Treat the drive as industrial waste for disposal
purposes.
Otherwise injuries could occur.
Others
• Never attempt to modify the drive.
Doing so could cause electric shock or injuries.
GENERAL PRECAUTIONS
For explanatory purposes, drawings in this manual may
show the drive without required covers or safety shields.
Be sure to replace such covers and shields and follow all
safety instructions in the manual before operation.
iv