Advertisement
5. Procedure for Connection to the User System
■ Connection
Please mount the supplied conversion board on the user system before using this product. The angle
cut linearly at one place only in the conversion board indicates the position of pin 1 of the device.
After the conversion board is connected, connect the header board to the user system.(The shape of
the connector prevents it from being inserted incorrectly.) (See Figure 4.)
Conversion board
■ Disconnection
Disconnect the conversion board from the header board vertically. Disconnect the conversion board
gently, not to apply excessive force.
Figure 4 Connection Position (Top View)
Header board
5
Advertisement
