1.
Level Dryer
Place
level here
Place
level here
Check levelness of dryer from side to side. Repeat from
front to back.
NOTE: The dryer must be level for the moisture sensing
system to operate correctly.
LEVEL
Not Level
2.
Adjust leveling legs
If dryer is not level, prop up using a wood block. Use wrench to
adjust legs up or down, and check again for levelness.
60
LEVEL DRYER
3.
To Install:
Place the base trim to bottom of dryer and match the
locating pins with the holes. Press the base trim firmly
upwards until it snaps into place.
To Remove:
On each corner. 1) Push down on top of base trim.
2) Rotate away from dryer and remove.
Not Level
Base trim (on some models)
Locating
Locking
Pins
Features