Table of Contents
Advertisement
Available languages
Available languages
ENCENDER/CANCELAR (POWER/CANCEL)
1
Touch to turn on/off or to stop/cancel a cycle.
2
QUÉ SECAR/CÓMO SECAR (WHAT TO DRY/HOW TO
DRY)
First select a cycle from the "QUÉ SECAR" (What to Dry) and
then select the "CÓMO SECAR" (How to Dry) to get the best
combination cycle available for the type of items you are
going to dry. See "Cycle Guide" for cycle details.
INICIAR/PAUSAR (START/PAUSE)
3
Touch and hold cycle will start after countdown.
Touch INICIAR/PAUSAR (Start/Pause) during a cycle to
pause it. Touch again to resume.
4
MODIFIERS (Not all cycles and options are available on all
models.)
NOTE: Dryer remembers the last completed cycle and cycle
settings. The next time you turn dryer on, it will be set to run
the last cycle.
Temperatura (Temperature)
Touch to modify the cycle's available temperatures Solo Aire
(Air Only), Bajo (Low), Medio (Medium), Medio Alto (Medium
High), Alto (High). Follow garment label instructions for best
results. Once a cycle has started, the temperature can be
changed within the first 5-8 minutes.
Niveles de Secado (Dryness)
Touch to modify the cycle's available dryness levels on the
sensor cycles Menos (Less), Normal (Normal), Más (More).
NOTE: Niveles de Secado (Dryness) is for use with Automatic
Cycles Only.
Prevención De Arrugas (Wrinkle Shield)
Touch to turn on/off and on with steam (select models).
Prevención De Arrugas (Wrinkle Shield) option adds up to
150 minutes of periodic tumbling and heat to help reduce
wrinkling. Prevención De Arrugas (Wrinkle Shield) option with
steam will add a short steam cycle after 60 minutes to help
smooth wrinkles.
CYCLE OPTIONS (Not all cycles and options are available
5
on all models.)
Use to select available modifiers for your dryer.
Conecta (Remote Enable)
Touch each time you want to remotely control via the
Whirlpool app. Follow the instructions in the "GET THE
WHIRLPOOL APP AND GET CONNECTED" section below
for more details.
NOTE: Once Conecta (Remote Enable) has been selected,
certain interactions with the dryer will cause it to cancel
Conecta (Remote Enable). Example: Opening the door.
CONTROL PANEL AND FEATURES
1
5
2
6 4
5
Señal Casi Seco (Damp Dry Signal)
Touch Señal Casi Seco (Damp Dry Signal) or touch and hold
Iluminación Interior (Drum Light) (depending on the model) for
at least 3 seconds to turn the Damp Dry Signal on or off. You
will get a sound and display notification as "Items are damp.
You can pause and reposition for best results".
Iluminación Interior (Drum Light)
Touch to turn the drum light on/off.
Opciones con Vapor (Steam Options)
Touch to add Steam and/or Reduce Static to selected cycle.
Steam option adds steam to the end of cycle to help smooth
wrinkle. Reduce Static will automatically tumble, pause and
introduce a small amount of moisture to the load to help
reduce static.
Steam Refresh (steam models only)
This cycle is best for reducing wrinkles from dry items. Cycle
time will increase, depending on number of items. This is an
independent cycle that cannot be combined with any other
cycle.
Más Tiempo (More Time)/Menos Tiempo (Less Time)
Timed Dry Adjust
Touch Más Tiempo (More Time) or Menos Tiempo (Less
Time) with the Timed Dry/Quick Dry cycle to increase or
decrease the length of the cycle time.
EcoBoost Option
The EcoBoost option will default on only for the Regular/
Normal cycle and is only available on that cycle. This option
allows you to increase your energy savings by using a slightly
lower heat level. The EcoBoost option will increase drying
times by approximately 40 minutes, which will be reflected on
the LCD Display. If optimal time is desired, touch EcoBoost
to turn off this option.
Alarma Fin de Ciclo (Cycle Signal)
Use this option to turn the signal indicating the end of a
drying cycle to Low, Medium, High, or Off.
NOTE: Press/hold Alarma Fin de Ciclo (Cycle Signal) to
Select the volume.
3
Appearance may vary depending on model.
69
Advertisement
Table of Contents
