Level Dryer - Whirlpool WED5100HW1 Installation And Care Instructions

1.

Level Dryer

Place
level here
Place
level here
Check levelness of dryer from side to side. Repeat from front to
back.
NOTE: The dryer must be level for the moisture sensing
system to operate correctly.
Not Level
2.
Adjust leveling legs
If dryer is not level, prop up using a wood block. Use wrench to
adjust legs up or down, and check again for levelness.
20
LEVEL Not Level
LEVEL DRYER
3.
Base trim (on some models)
To Install:
Locating
Place the base trim to bottom of dryer and match the
locating pins with the holes. Press the base trim firmly
upwards until it snaps into place.
To Remove:
On each corner. 1) Push down on top of base trim.
2) Rotate away from dryer and remove.
Locking
Pins
Features