Feature Bar - Cisco Network Assistant Getting Started Manual

Menu Bar, Toolbar, and Feature Bar
Table 2-1 Toolbar Icons and Buttons (continued)
Toolbar Option Icon
Topology
Legend
Help for Active
Window
Feedback
Search
1. Not available in read only mode. For more information about the read only and read-write access modes, see the
2. Some options from this menu option are not available in read only mode.

Feature Bar

The feature bar shows the networking features that are available for the devices in your community or
cluster. By default, the feature bar is in standard mode. In this mode, it is always visible, and you can
reduce or increase its width. In autohide mode, the feature bar appears only when you move the cursor
to the left edge of the Network Assistant workspace.
•
•
Getting Started with Cisco Network Assistant
2-6
Task
Display the Topology view.
Display the legend, which describes the icons, labels, and links.
Display the help topic for the active, open window. You can also click Help from the
active window or press the F1 key.
Open a Web page where you can leave feedback about your experience with Network
Assistant.
Enter terms in the field at the right of the toolbar, and click the Search button to search
the online help.
To see the feature bar in standard mode, click Application > Feature Bar, and select Standard
Mode.
To hide the feature bar, click Application > Feature Bar, and select Autohide Mode.
Chapter 2 Network Assistant Features
"Privilege Levels" section on page
OL-6194-07
2-9.