Connect Network Via Adsl - EasyN F2 Series User Manual

For camera-1 and computer-2 in picture 3, to access camera-1 through
computer-2, then need to set step 1）first to confirm computer-1 can access
camera-1, then configure router-1 （ router-1 should support port
forwarding）, then computer-2 can apply to access camera-1 via router-1.
Normally, computer-2 only can send message to router-1, so it can not
access camera-1 without configuration of router-1.

4.3. CONNECT NETWORK VIA ADSL

Connect device to computer via cable.
Configure device basic settings through IP Camera tool (details refer to:
IPcamera tool).
Login device as administrator, access PPPOE setting page to input account user
and password.
Meanwhile to enable DDNS server function then click <set> to restart
device.(details refer to:
Connect device to internet via ADSL, then it can be accessed via ddns through
WAN.
5.6 ddns settings)
- 9 -
5.1
MF2E-E-A4