Appendix; Familiar Problem - EasyN F2 Series User Manual

please refer to router's manual. For most routers，we can find option as virtual
server settings，input camera-1 IP address and port. As below:
Notice:
for more IP Camera devices，it needs to set port forwarding for each one，
and as distinguishable，we should set different IP and port for each device. If
the port is not 80，we should access device by adding a ":" and device port behind
the IP address, such

9. APPENDIX

9.1. FAMILIAR PROBLEM

What could we do when forgot the login password?
On power condition，press reset button（on the device bottom）till 10 seconds，
then device is set to factory settings，including administrator user and password.
Default user: admin
Default password: no password
What could we do when the view screen is white?
Please adjust video parameters of camera（mode, brightness, contrast,
saturation, etc.）.
as:http://219.134.170.92:81
- 32 -
MF2E-E-A4