EasyN F2 Series User Manual page 21

Hide thumbs Also See for F2 Series:
Table of Contents

Advertisement

Support three modes(no record, continuous record, record on schedule). Normally, 1G SD card
size can support to record 2.5 hours on VGA resolution.
Continuous record: provide complete record file but limited by SD card size.
Record on need: only record following schedule, support longer time record, but can
not provide record file for all time.
The remaining size of SD card needs to notice, and user can select whether enable
cycle record mode.
When enable cycle record, the new record file will cover the former
record file, the not-covered record file will be saved, and the record file system
can fix time as second point. It is our special record file system's advantage.
A. No record mode: disable SD record function. As Picture(2-1)
Picture(2-1)
B. Continuous record mode: when enable this mode the record is running when camera is working.
And it can support cycle record mode and alarm on full record mode. As Picture(2-2):
Picture(2-2)
C. Record on need: support offline record(when camera lost network connection alarm and record)
and cycle record control for 24 hours, configure record mode for each hour on need, there are four
modes for such configuration:
- 21 -
MF2E-E-A4

Advertisement

Table of Contents
loading

Table of Contents