EasyN F2 Series User Manual page 22

1> no record
2> record for specified hour
3> record when motion detected once
4> record on IO event once
5> record on motion detection or IO event(motion detection or IO input)
For example, set 7-12 o'clock motion detection(record time is 10 seconds), 13-16 o'clock GPIO
alarm(record time is 20 seconds), 17-20 o'clock continuous record, the configuration should be as
below:
Picture(2-3)
Picture(2-4)
- 22 -
MF2E-E-A4