Login Ip Camera - EasyN F2 Series User Manual

Notice: device factory set IP: 192.168.1.126，port 81
Detail configuration:
Please carefully check current computer information on right down side
of interface, it lists information about computer-1's IP
configuration, if there are more network adapters in computer, please
select the right network that camera-1 working on.
IP address: configure IP address, it must confirm to be the same subnet
within PC.
Mask: default mask: 255.255.255.0
Gateway: confirm the PC within the same gateway
DNS: DNS provider's IP address
Port: device provides HTTP service port, default is 81
User and password: default administrator account user: admin, no
password

5.2. LOGIN IP CAMERA

We can directly access IPCAM through IP Camera Search Tool or IE.
1) Double click option IE in device list to open login page
2) Directly access via IE by inputting address on address blank of IE browser. As below:
After installation, we can access video view page, as picture 7:
Picture 5 login interface
- 11 -
MF2E-E-A4