Central vacuum power nozzle accesory kits (16 pages)
Summary of Contents for Tacony POWER-FLITE PF19SV
Page 1
Safety, Operation, and Maintenance Manual for FAST DRY-WET/DRY VACS Models PF19SV, PF20SV and optional CT70 squeegee attachment Read and follow all instructions, warnings and cautions before A Tacony Company using this vacuum! 8465...
Page 2
READ ALL INSTRUCTIONS BEFORE USING! ongratulations on purchasing a Powr-Flite® If damage is discovered, immediately notify the wet/dry vacuum. Given proper care, this transportation company that delivered your product will afford you many years of trouble-free vacuum.. As a shipper, we are unable to report operation.
Page 3
IMPORTANT SAFETY PRECAUTIONS IMPORTANT SAFETY PRECAUTIONS D D A A N N G G E E R R : : The PF19SV and PF20SV are double insulated machines. A ground wire is not used on double insulated machines. Servicing a double insulated machine requires extreme care and knowledge of the system and should be done only by a qualified service person.
Page 5
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS DRY OPERATION OF VACUUM (1-3) The wet/dry vacuums are equipped with a bypass motor. Install the filter frame and cloth filter, place the motor head on the canister and snap down the hold-down clamps. WET OPERATION OF VACUUM (1-3) The wet/dry vacuums are equipped with a bypass motor so that the working vacuum is separated from the cooling C C A A U U T T I I O O N N : :...
Page 6
ILLUSTRATED PARTS LIST ILLUSTRATED PARTS LIST PF19SV, PF20SV Body Assembly Ref. # SW # Description FD87 Handle Head, Non-Insulated FD65 Handle Head, Insulated FD66 Screw FD67 Screw FD18 Screw FD20 Cable Clamp Strain Relief FD68 16/2 30 ft. Cord FD69 Cover, Motor FD21 Contact Block...
Page 7
OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT CT70 SQUEEGEE ATTACHMENT ASSEMBLY INSTRUCTIONS Slide squeegee attachment Position T-bar under Attach T-bar to frame with onto T-bar, center and tighten vacuum frame. bolts (2) and nuts Attach 2 ft. connector hose. thumb screws to secure unit (2) provided.
Page 8
MAINTENANCE GUIDE MAINTENANCE GUIDE Loss of Suction CAUSE: SOLUTION: 1) Tank Full 1) Empty Tank 2) Dry filter assembly clogged. 2) Clean cloth filter. 3) Clogged hose or wand. 3) Remove obstruction. 4) Tank rim is dented. 4) Replace tank. 5) Loose or broken fan.
Need help?
Do you have a question about the POWER-FLITE PF19SV and is the answer not in the manual?
Questions and answers