Page 2
Basic Wiring ............................3 Chaining the modules ........................4 Addressing of the module ..................5 Automatical addressing from the application Domestia Home Manager (via the master module) ............................5 Half-automatical addressing from the application Domestia Home Manager (via the master module) ..........................5 Manual addressing ........................
Page 4
Adres 1 2 3 4 charge setting Disclaimer: Domestia assumes no responsibility and will not accept any liability for damage that may affect your product following the use of loads that are not in DML-004-003 accordance with the use of the product. Please refer...
Page 5
(from firmware V1.28), DMC-012-003 or DME-LAN-002 (from firmware V3.0) the 13-24 module DMC-012-003S can be addressed from the programming application 17-28 « Domestia Home Manager ». The programming Software scans the bus RS485 21-32 to detect the connected modules. It is then possible to choose the module’s 25-36 address directly from this application.
Page 6
• Damage due to electrical installation faults • Repair attempts made by the customer or a third party which are not permitted • Damage caused by accident, force majeure or other causes for which Domestia cannot be held responsible • Fault not affecting the proper functioning or proper use of the equipment.
Page 7
System chart Output’s name Impulse Shutter Toggle Timer Dimmer control...
Page 8
Output’s name Impulse Shutter Toggle Timer Dimmer control...
Need help?
Do you have a question about the DMC-012-003 S and is the answer not in the manual?
Questions and answers