7. Enter the IPv4 Address, Subnet Mask, and Default Gateway configurations in the fields that are provided at the Network Adapters
screen then press Enter.
8. Press the Y key to confirm the changes that you made and to restart the management network.
9. Select Troubleshooting Options and press Enter.
10. Select Enable ESXi Shell from the Troubleshooting Mode Options menu.
Enable ESXi Shell
11. Press Enter to enable the service.
12. Login to the ESXI Shell and add the following entries in the passthru.map file located at /etc/vmware/passthru.map.
168c
003c
d3d0
How to add ESXi license
1. Log into ESXi vSphere UI.
76
Configure BIOS and Install ESXi OS
false