Taking A Break ..Five Minutes Or More - Kärcher K 3.450 Operator's Manual

STEP 3:

Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 4:

To rinse, move the VPS out of „Mix"
position and pull trigger to operate
unit.
STEP 5:

Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.

TAKING A BREAK ..five minutes or more

STEP 1:

Release trigger and engage gun
safety lock.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
Always Use Kärcher
Best Results
Kärcher biodegradable detergents are
®
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a long-
er life. For Kärcher
your retailer or visit our website:
www.buykarcher.com
CAUTION
Never use:
– Bleach, Chlorine products and other
corrosive chemicals
– Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
STEP 2:

Turn pressure washer to OFF (0) po-
sition.
Detergent for
®
Detergents, check
®
English
9