Table of Contents
Advertisement
100
Swift Vacuum (Multi-tool) MT
Maintenance
MAINTENANCE RECOMMENDATIONS:
Daily Checks:
• Clean the machine and lubricate unpainted surfaces with a Teflon lubricant. Wipe off any excess and buff with a
dry polishing cloth. This will reduce the likelihood of rust forming.
• Check cutter teeth for chips and dullness.
• Generally, inspect the machine for damage and loose or warn parts.
• Collets and spindle collet hole must be cleaned regularly. Ensure that the slots in the collets are free of sawdust
as sawdust builds up and will stop the collet compressing. If the collet or spindle hole is not clean, the router bit
may not run true, and this will affect the performance of your machine.
Weekly Checks:
• Clean the Cutters.
• Check cutter teeth for chips and dullness.
• Generally, inspect the machine for damage and loose or warn parts.
• Check the dust extraction for blockages and any large bits that could cause blockages.
Note: If ones Business is a Quality Management System (QMS) Certified Facility, suggest incorporating the
Maintenance Recommendations and Trouble Shooting Methods into the Facilities QMS Preventive Maintenance
System or Machine Maintenance System.
**Maintenance Tips**
• Keep the guide rails clean. After cutting, debris will build up on the rails and collect near the bearings.
• Periodically lubricate guide rails using the oiler. One pump is sufficient for one lubrication.
• Periodically do maintenance on the PC tower by removing dust buildup. This will prevent overheating issues and
possible malfunctioning.
© 2021 Enter your company name
Advertisement
Table of Contents
