Table of Contents
Advertisement
Device Mode/Source keys
As the remote can control your Receiver as well as a range of
other equipment: many of the buttons have more than one
function depending on the ' d evice mode' selected on the
remote control.
The Device Mode keys (shown below) select the source
on the Receiver. If one of these keys is pressed briefly, a
command is transmitted to change the source on the unit.
Also the functionality of the remote control changes to
operate the selected source device; it's like having a bundle
of different remotes in your hand!
Internal FM or DAB tuner input
Auxiliary input
Ethernet input (e.g. Internet radio)
Bluetooth input
Audio-visual input
Satellite input
Personal Video Recorder (or Digital
Video Recorder) input
Games console input
Blu-ray Disc or DVD player
Compact Disc player input
Set Top Box decoder input
UHD player input
UHD
Each Device Mode changes the behaviour of many of the
remote keys to control the source device appropriately. For
example: in
mode 9 plays the previous CD track, but in
CD
mode 9 issues the TV ' c hannel down' command.
The remote remains in the last selected Device Mode so it
is not necessary to press a Device Mode key before every
command key if all you are doing is playing or skipping tracks
on a CD, for example.
Navigation keys
The Navigation keys steer the cursor in Setup
menus or on-screen menus. They also replicate the
navigation functions of original remotes supplied
with other home entertainment devices in your
system.
confirms a setting.
OK
Volume control
By default, the remote is set up so that the volume control
and mute buttons always control the volume of the Receiver,
regardless of which Device Mode the remote is currently set
for. This is known as volume 'punch through' .
For example, if you are listening to a CD, you will probably
have the remote in
Device Mode to control the CD player.
CD
You can use the volume controls on the remote directly to
adjust the volume of the Receiver without first having to press
to put the remote into
Device Mode. The volume
AMP
buttons 'punch through' the
Device Mode on the remote
CD
to the
Device Mode.
AMP
Volume 'punch through' can be disabled individually for any
Device Mode if desired.
Customising the remote
The remote offers a Code Learning feature that allows you
to copy up to 16 functions from an original remote control
onto the remote keypad. For details of this, and other
customisation features, see "Customising the Remote" on
page EN-22.
The remote complies with Part 15 of the
FCC rules
AV
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
a reasonable protection against harmful interference in
a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet or a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
EN-21
EN
Advertisement
Table of Contents
