Scope; Required Hardware And Software - Cisco DVD-ROM Upgrade Manual

Scope

Scope
This document provides instructions for removing the tape drive and installing the DVD-ROM drive in
to the Cisco MeetingPlace 8112.
To locate additional information about the Cisco MeetingPlace 8112 or other Cisco MeetingPlace
products, see the

Required Hardware and Software

You need the following hardware and software to upgrade to the Cisco MeetingPlace Audio Server
Release 5.2 DVD-ROM:
Required Hardware and Software
The following is required to upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM:
•
•
In addition to the software in the Cisco MeetingPlace 8112 DVD-ROM Kit, the following software is
required:
When you upgrade from Cisco MeetingPlace Audio Server Release 5.0.2 or Release 5.1.0 to
Note
Release 5.2, you must upgrade the hardware before you upgrade the software.
•
•
•
Recommended Hardware
We recommend that you have the following hardware for contingency:
•
Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure
2
"Additional References" section on page
MP-8112-DVD-KIT=Cisco MeetingPlace 8112 DVD-ROM Retrofit Kit
Cisco MeetingPlace 8112 DVD-ROM Kit (must be returned)—Contact your NCE to obtain this kit,
which contains the following items:
BIOS 5.2 IDE Enable Diskette
–
Update Diskette for M3 DVD-ROM Retrofit Kit
–
Cisco MeetingPlace 8112 power cable for hard drives, CD-ROM, and floppy drive
–
Internal 4-drop SCSI cable
–
7" VGA monitor
–
– Slim keyboard
MP-AUDIO-CD-5.2.0=Cisco MeetingPlace 8100 Audio Conference Software 5.2.0 Media Kit
MP-MT-CD-5.2.0=Cisco MeetingPlace MeetingTime 5.2.0 Media Kit
MP-BACKUP-CD5.2.0=Cisco MeetingPlace Network Backup Gateway 5.2 Media Kit
MP-8112-CPU=Cisco MeetingPlace 8112 CPU Card
15.
78-16489-01