Kärcher WV 1 Plus Operator's Manual page 8

Surface cleaner
Hide thumbs Also See for WV 1 Plus:
Table of Contents

Advertisement

Available languages

Available languages

Start working
Set the spray nozzle to ON.
Press the spray lever to apply the
detergent from the spray bottle and
spray evenly on the surface. There-
after loosen the dirt with the micro-
fiber pad.
1.
Press the on/off button to turn appli-
ance on.
Pull the appliance from the top down
to suction off the cleaning fluid.
8 English
OPERATING INSTRUCTIONS
2.
Press the on/off button to switch off
the appliance.
OFF
Notes
Only operate the appliance until the
MAX mark of the waste water tank
has been reached. Switch off the
appliance and empty the waste wa-
ter tank (see Chapter on "Care and
maintenance instructions").
If the battery is low, the LED indica-
tor starts to flash slowly and the ap-
pliance switches itself off after a
certain period of time.
Areas that are difficult to reach can
be vacuumed both horizontally and
above head height to a limited de-
gree.
Please observe the following points
to prevent streaks appearing:
Do not press the appliance too
forcefully but rather allow it to glide
over the surface.
Hold the appliance at the correct
angle against the surface.
Use KÄRCHER detergent since
this is specially developed for the
surface cleaning. Observe the cor-
rect dosing for the detergent.
Spray sufficient fluid onto the sur-
face to ensure it not too dry.
Clean the squeegee blade regular-
ly.

Advertisement

Chapters

Table of Contents
loading

Table of Contents