JLG 740AJ Service And Maintenance Manual page 30

SECTION 1 - SPECIFICATIONS
2. Wheel Bearings
Lube Point(s) - Repack
Capacity - A/R
Lube - MPG
Interval - Every 2 years or 1200 hours of operation.
3. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (0.5 L) - 1/2 Full
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation.
Comments - Place Fill port at 12 o'clock position and
Check port at 3 o'clock position. Pour lubricant into fill
port until it just starts to flow out of check port.
1-8
4. Hydraulic Return Filter
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter or as indicated by Condition
Indicator.
5. Hydraulic Charge Filter
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter or as indicated by Condition
Indicator.
6. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 40 gallons (151 L) Tank; 77 gallons (291.4 L)
System
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
3121160