Kärcher BR 47/35 ESC Original Instructions Manual page 23

Hide thumbs Also See for BR 47/35 ESC:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
Cleaning the device
Warning
Risk of damage! Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Wipe the insides of the dirt water reservoir.
 Clean the fluff filter.
Maintenance intervals
Tilt the machine in the maintenance po-
sition
The escalator cleaner must be accessible
from the bottom side to perform any testing
or maintenance jobs on the machine.
 Take the help of another person to tilt
the machine forward until it stands on
the front casing.
Daily before use
 Check spray pattern of the nozzles.
 Check if suction nozzles are dirty.
 Check emergency stop function of the
foot pedal.
Press the foot pedal, set the appliance
switch to 'dry vacuum cleaning', the ap-
pliance must run. Release the foot ped-
al; the appliance must stop.
Get the machine repaired only by au-
thorised customer service agents.
 Check the locking of the rear wheels.
Get the machine repaired only by au-
thorised customer service agents.
 Check for wear and tear:
m-master.com.ua
– 7
EN
m-master.com.ua
+38(050) 187 08 87 | +38(096) 187 08 87
Roller brushes, intake brushes, combs,
guide rails, hoses, stopper and front
wheels. Replace stopper and front
wheels, if required, only through author-
ised customer service agents.
 Check mains cable and plug for dam-
age or breakage. Get them replaced
only through customer service agent or
an electrician.
After 100 operating hours
 Check if all fasteners are fastened tightly.
 Check the drive belt for tension and
wear (Customer Service).
Maintenance Works
Clean the fluff filter
 Unscrew the tin cover plate using a torx
spanner.
Note
You will find a torx spanner in the holder of
the drainage hose of the dirt water reservoir.
 Clean the fluff filter.
 Replace the tin plate.
+38(050) 187 08 87 | +38(096) 187 08 87
1
2
23

Advertisement

Table of Contents
loading

Table of Contents