Introduction; Scope Of Delivery; Technical Data; Legend Fig.1 - Scheppach ACM18 Translation From The Original Instruction Manual

Ash vacuum
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9

1. Introduction

MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER
We wish you much joy and success in working with your
new appliance.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern-
ing the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.

2. Scope of delivery

Receptacle
Suction tube
Suction hose
Operating instructions
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

3. Technical Data

Cubic capacity D x H
Receptacle capacity
Suction hose
Long suction hose
Weight
Motor
Input Power P1
Speed
Noise level parameter

4. Legend Fig.1

1
Receptacle
2
Motor
3
Intake nozzle
4
Extraction hose
5
Suction tube
6
On/Off switch
7
Carrying handle
8
Locking hook

5. General Safety Instructions

Make sure these instructions for use and operation
are available to those people who operate the unit.
Important Information
Read these instructions carefully all the way through.
Most accidents related to the use of the extraction
unit come about due to non-compliance with basic
safety rules. If you can recognise potentially danger-
ous situations in time and are careful about complying
with safety regulations, you can avoid accidents. Only
use the extraction unit in the way recommended by the
manufacturer.
Attention! This equipment designed only to be used in a
dry situation and not where it is wet

6. Safety Instructions

Inform all persons who work with the machine of
these safety instructions.
Comply with all safety and danger instructions on
the machine.
Make sure all safety and danger instructions on the
machine are completely legible.
Check the electrical wiring. Do not use defective
wiring.
Make sure that the machine is placed on a firm
surface and is stable.
Protect the machine from wetness.
Keep children away from the machine when it is
plugged in.
The operating persons must be at least 18 years
old.
Trainees must be at least 16 years old, and may
only work with the machine under supervision.
Only specialists should install, repair and service
the electrical wiring.
Pay attention to the direction of the engine – see
the electrical connections.
GB
300 x 370 mm
18 l
D 28 mm
1000 mm
4,2 kg
220-240V / 50 Hz
1200 W
2850 1/min
84 dB
11 І 32

Advertisement

Table of Contents
loading

Table of Contents