Haier AC092ACBHA Operation And Installation Manual page 17

Installation Procedures
2. INSTALLING DRAIN HOSE
Select whether the drain hose will be connected
to the left or right side.(Fig.3) Insert the drain
hose into the drain pan, then secure the drain
hose with a nylon fastener. (Fig.6)
(Fig. 6)
Drain pan
Drain hose
Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port
of the indoor unit.
Fig. 8
Arrange the drain hose
lower than this portion.
Do not install the unit drain hose side is too high. Height A should be less than 5 mm.(Fig.9)
Fig. 9
B. UNDER CEILING TYPE
Using the installation template, drill holes for
piping and anchor bolts(for holes).(Fig.10)
Nylon fastener
OK NO
Drain hose
CAUTION
Drain hose
A
200mm
Fig. 10
15
Wrap the insulation (drain hose) around the drain
hose connection. (Fig.7)
(Fig. 7)
Drain pan
Drain hose
NO
A
900mm
Installation
template
Drilling position
for piping
Insulation
(Drain hose)
Drilling position
for anchor bolt
Ceilling
Wall