Preparation - Beko DN 150120 D Manual

4

Preparation

C
Your freezer should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not
be located under direct sunlight.
C
The ambient temperature of the room
where you install your freezer should
at least be 10°C. Operating your
freezer under cooler conditions this is
not recommended with regard to its
efficiency.
C
Please make sure that the interior of
your freezer is cleaned thoroughly.
C
If you want to place two products
side by side, e.g. a refrigerator and
a freezer, as a side by side solution
you have to use a decoration kit
which contains a small mat and a
decoration part. The mat is mounted
on the side of one of the products
to create a space between the
products. The decoration part is
placed between the products to hide
the gap between the products (Fig.
2). The decoration kit is not a part of
the product but can be delivered as
an accessory.
C
When you operate your freezer for
the first time, please observe the
following instructions during the initial
six hours.
- The door should not be opened
frequently.
- It must be operated empty without
any food in it.
- Do not unplug your freezer. If a
power failure occurs out of your
control, please see the warnings in
the "Recommended solutions for
the problems" section.
C
Original packaging and foam
materials should be kept for future
transportations or moving.
C
Clean the interior of the freezer as
recommended in the Maintenance
and cleaning" section.
11
EN