Advertisement
Completing First Start Setup
The first time the encoder is powered, the LCD display will present a series of menus that will assist in
setting up the system clock, date, and video input format (NTSC [North America/Japan] or PAL).
Table 3
first start setup.
Table 3
Icon
1.
2.
3.
4.
5.
OL-17934-01
lists and describes the buttons on the front panel of the encoder that you will use to complete the
Front Panel Buttons
Description
Power button
Enter button
Up and down arrow keys
Stream button
To start the encoder, press the <POWER> button located on the front panel.
During the power up process, the encoder LCD readout displays the following message:
After the encoder powers up the first time, it displays the following message:
Press the <ENTER> button to begin the initial setup.
The encoder will now ask you to set the date.
Quick Start Guide for Cisco Digital Media Encoder 1100
Completing First Start Setup
5
Advertisement
