Specifications - J&M 44-50 Operating And Maintenance Manual

Vibratory pile driver/extractor with model 580 power pack
Table of Contents

Advertisement

MODEL 44-50
VIBRATORY
DRIVER/EXTRACTOR
I.
GENERAL DESCRIPTION
F. CONTROL PENDANT
The vibrator is operated by a hand-held control pendant. The control pendant has three,
two-way switches (one with a light) and one push button. One switch (SLOW-FAST) raises
and lowers the diesel engine speed. The second switch (REVERSE-FORWARD) starts
and stops the vibrator. The other switch (OPEN-CLOSE) operates the hydraulic clamp.
The light indicates that adequate clamping pressure exists for vibration to begin. The (red
mushroom) push button (EMERGENCY STOP) shuts down the diesel engine instantly, in
the event of an emergency. Note: Controls are duplicated on the control panel in case the
pendant is damaged. (See pg. III-5, Section E-e)
G. SPECIFICATIONS
1. Constant improvement and engineering progress make it necessary that we reserve
the right to make specifi cation changes without notice.
W
T
ll
Always consult J&M in your area for current or additional
information you may require.
L
2. Model 44-50 VIBRATOR (with hydraulic clamp)
Type. ....................................................Hydraulic
Eccentric Moment ......... 4400 In-lbs. (50.7kg-M)
Frequency ...................................800-1600 VPM
Amplitude ............................... 1.20 in. (30 mm)
Pile Clamping Force ..............125 Tons (1112kN)
Max. Line Pull for
Extraction ................................. 80 Tons (712kN)
Weight Bare ......................12,400 lbs. (5,625kg)
Weight with 126 Clamp .....14,800 lbs. (6,713kg)
Length [L] .....................................97 in. (241cm)
Width [W] .......................................22 in. (56cm)
CLAMP BODY
Throat Width [T] .......................14.25 in. (36cm)
Height with Clamp [HH] ..............110 in. (280cm)
Height without clamp [H] ..............83 in. (211cm)
3. MODEL 580 POWER UNIT
Type ..........................................................Diesel
Engine .................................................CAT C-15
Horsepower (2100 RPM) ................ 580(433kW)
Weight ...............................16,500 lbs. (7,484kg)
Length[lI] .....................................158in. (401cm)
Width [ww] .....................................73in. (185cm)
ww
Height [hh] ....................................95 in. (241cm)
I-3
OPERATING
INSTRUCTIONS

Advertisement

Table of Contents
loading

Related Products for J&M 44-50

Table of Contents