Gprs/G - HTC Touch Touch Pro 2 User Manual

156 Internet
To save battery power while connected to a Wi-Fi network
Using Wi-Fi quickly consumes battery power. Turn off Wi-Fi when not in use.
You can also enable power saving settings while using Wi-Fi.
1. Tap Start > Settings, and then tap Menu > Wireless Networks >
Power Mode tab.
2. Move the Power Save Mode slider to a position
that optimizes performance with the least
power consumption.
For example, move the slider to the left (Best
Performance) to have the optimal wireless
network performance; move to the right (Best
Battery) to obtain the maximum battery usage.
GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and
receive email on your device. You will need a data plan to use your wireless service
provider's GPRS/G network. Check with your wireless service provider to find out
about GPRS/G rates.
If you completed the Connection Setup process for auto-configuring the data
connection the first time you turned on your device, your device is ready to use
your wireless service provider's GPRS/G services. Do not change the connection
settings as this may cause services to stop working. If you need to add another
GPRS/G connection on your device, contact your wireless service provider.
Note
If you did not complete the auto-configuration process before, follow the instructions
in "To manually select the network operator to use for data connections" in Chapter
1 to configure the data connection for your device.