Charge The Battery - AT&T Tilt Getting Started Manual

Charge the Battery

New batteries are shipped partially charged. Before you start using your
device, it is recommended that you install and charge the battery. Some
batteries perform best after several full charge/discharge cycles. You can
charge the battery in two ways:
• Charging the device's battery by connecting the power adapter.
• Connecting your device to a PC via the provided USB Sync cable.
Charging is indicated by a solid amber light on the left LED indicator.
As the battery is being charged while the device's power is on, a charging
icon ( ) will be shown on the Today screen.
After the battery has been fully charged, the left LED becomes green and a
full battery icon (
AT&T Tilt
) appears on the Today screen.
Note:
Only the AC
adapter and
USB cable
provided with
your device
should be used
to charge the
device.
Warning:
Do not remove
the battery
from the device
while you are
charging it
using the AC or
car adapter.
As a safety
precaution, the
battery stops
charging when
it overheats.
7