Insert Battery - AT&T Tilt Getting Started Manual

Insert Battery

1. Remove battery cover by pressing down
and sliding away from you as shown in the
illustration.
2. Insert the battery so that its exposed
copper contacts are aligned with the
copper conductors on the upper right side
of the battery compartment.
3. Insert the right side of the battery first, then gently push the battery into
place.
4. Place the cover back on the device and slide it toward you until it clicks.
AT&T Tilt
Steps?
4
Takes?
1 minute
Tip:
Your battery
comes partially
charged. To
find out how
to charge
your device,
see 'Charge
the battery'
section later in
this document.
5