Table of Contents
Advertisement
76 Setting Up Your PDA Phone
3.
After selecting a finger to enroll, you are prompted to swipe your finger
across the fingerprint sensor.
4.
Repeat this procedure at least four times to register your fingerprint.
When you have successfully registered, you will be prompted to enroll
another fingerprint. Tap OK to proceed.
5.
Select another finger to enroll and repeat the previous steps, or tap
Next to continue.
6.
After you are done, tap No if you do not want to enroll any more
fingers.
7.
Tap Finish.
For more information on how to use HTC Fingerprint Manager, tap
see Help on your device.
Authentication
After enrolling one or more of your fingerprints, HTC Fingerprint Manager
will prompt for fingerprint authentication whenever you log on to your
device. Swipe a finger that has an enrolled fingerprint on the fingerprint
sensor to log on and access your device data.
If you have enrolled your fingers while setting up your device for the first
time, then the Authenticate screen of HTC Fingerprint Manager will appear
every time you power on your device, and prompt you to swipe your enrolled
fingers on the fingerprint sensor. After your fingerprints are authenticated,
you will be allowed to log on to the device and access your personal data.
or
Advertisement
Table of Contents
