Table of Contents
Advertisement
196 Experiencing Multimedia
Camera settings
Tap the Menu icon (
Settings screen allows you to configure capture and camera settings.
The Camera settings consist of two tabs: Capture Settings and Advanced.
Use the Capture Settings tab to adjust options for your selected capture
mode; Use the Advanced tab to set the Camera program preferences.
You can either tap on-screen or press the NAVIGATION Control buttons to
navigate the Camera Settings screen.
Capture Settings tab
The available options on this tab depend on the capture mode selected.
•
Template (Picture Theme). Select
a template to use.
•
Effect. Choose a special effect such
as Grayscale, Sepia, etc., to apply to
your photos or video clips.
Note
•
Time Stamp (Photo, Sports, Burst, and GPS Photo modes). Choose
whether or not to include the shooting date and time on captured
photos.
•
Quality (Photo, Contacts Picture, Panorama, Sports, Burst, and GPS
Photo modes). Select the JPEG image quality level for all captured still
images. You can choose from Basic, Normal, Fine, and Super Fine.
•
Metering Mode. Select a metering mode to allow the camera to
measure the amount of light and calculate the best-fit exposure value
before capturing. Choose either Center Area to measure light using
the center area of the image or Average to measure light using the
area all around the image.
•
Storage. Select where you want to save your files. You can either save
the files to the Main memory, NAND flash, or to a storage card.
•
Capture Speed (Burst and Sports modes). This determines the interval
between shots. Fast captures consecutive shots at the shortest interval.
) to open the Camera Settings screen. The Camera
White Balance cannot be
applied if an Effect has already
been applied.
Advertisement
Table of Contents
