Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference; Screwdriver Safety Warnings - Makita 6841R Instruction Manual

ENGLISH (Original instructions)
1. Lock button
2. Switch trigger
3. Reversing switch lever
4. Hook
5. Clamping screw
6. Casing
7. Thumb screw
8. Plane bearing
9. Dust cover

SPECIFICATIONS

No load speed (min
Overall length
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
SCREWDRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Explanation of general view
10. Bit
11. Lever
12. Stopper base
13. Plate
14. Lock lever
15. Magazine cap
16. Screw strip
17. Magazine
18. Slotted passage
Model
Screw strip
-1
)
Net weight
Safety class
3. Hold the tool firmly.
ENE033-1
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
ENF002-2
could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
GEA010-1
manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
GEB017-4 • Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
"OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
Reversing switch action (Fig. 2)
This tool has a reversing switch to change the direction of
rotation. Depress the reversing switch lever from the A
side for clockwise rotation or from the B side for
counterclockwise rotation.
19. Portion A
20. Screw-driving position
21. Reverse lever
22. Protrusion (A)
23. Extension handle
24. Limit mark
25. Brush holder cap
26. Screwdriver
6841R
4 mm x 25 mm - 41 mm
6,000
333 mm
2.0 kg
/II
5