Using The Remote Control - HP USB TV Tuner User Manual

Using the remote control

To use the remote control, follow these steps:
1.
2.
3.
4.
The remote control must be pointed at the remote sensor when any button is pushed for the TV tuner
to receive the signal.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Be sure that the remote control batteries are installed. Refer to
batteries on page 32, later in this chapter.
Be sure that the remote sensor is connected to the computer. Refer to Chapter 3,
on page 6, for details.
Turn on the computer.
Point the remote control at the remote sensor to use it to control the TV tuner.
NOTE: The remote sensor should be located in a convenient place. Be sure that nothing blocks
the path between your remote control and the remote sensor.
Replacing the remote control
TV tuner setup
Using the remote control 31