Using Composite Video Or S-Video (Receiver Connections Only); Composite Video - HP USB TV Tuner User Manual

Using composite video or S-Video (receiver connections
only)
If you are using a cable or satellite receiver in your setup, you have the option of improving video quality
by connecting a composite video or S-Video cable (instead of an RF coaxial cable) from your receiver
to the TV tuner.
NOTE:
The following table compares the video types and associated video quality.
Supported video types
RF coaxial/antenna (standard definition) Good
Composite
S-Video
Antenna (high definition)
NOTE:
NOTE:
or high definition, approximately 1920×1080 (1080i).
Refer to the following sections for instructions on connecting composite video or S-Video.

Composite video

To connect composite video, follow these steps:
1.
2.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Some advanced connections require additional cables, purchased separately.
If your computer and your TV support it, an HDMI connection provides superior video quality.
ATSC digital TV may be broadcast in either standard definition, approximately 640×480 (480i),
Connect the audio/video cable to the USB port on the TV tuner.
Connect a composite video cable (purchased separately) (1) to the composite video jack on your
cable or satellite receiver.
NOTE: Refer to your cable or satellite receiver user guide for the exact location and labeling of
jacks.
Video quality
Better
Best
Superior

Using composite video or S-Video (receiver connections only)

19