Connection 2: Connecting With Regular Tv Or Cable Tv Without A Receiver; Connection 3: Connecting With Satellite Tv Or Cable Tv With A Receiver - HP USB TV Tuner User Manual

Connection 2: Connecting with regular TV or cable TV without a receiver

NOTE:
To connect the TV tuner to your regular TV or cable TV source without a receiver, follow these steps:
1. Insert the TV tuner (1) into a USB port on the computer.
NOTE:
2. Connect an RF coaxial cable (purchased separately) to the TV tuner (2) and then to your regular
TV or cable TV wall jack (3).
3. Connect the remote sensor to a USB port on the computer. Refer to
sensor and infrared (IR) emitter cable on page
NOTE:
connections on page

Connection 3: Connecting with satellite TV or cable TV with a receiver

NOTE:
components on the receiver.
NOTE:
10 Chapter 3 TV tuner setup
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Computer features may vary. Cable lengths are not shown to scale.
Due to power and bandwidth requirements, do not insert the TV tuner into a USB hub.
For additional connection steps, such as adding a television, refer to Chapter 4,
17.
Refer to your cable or satellite receiver user guide for the exact location and labeling of
Computer features may vary. Cable lengths are not shown to scale.
Step 5: Connect the remote
12, for details.
Advanced