Configuring The Tv Display - HP USB TV Tuner User Manual

3.
4.
5.
If you connected your TV after running the Setup Wizard for the first time, you may need to reconfigure
settings.
NOTE:
The Setup Wizard will guide you through all the configuration steps required for your connection.

Configuring the TV display

You can use MediaSmart, QuickPlay, or Windows Media Center to configure the display on your TV.
To configure the TV display using MediaSmart, follow these steps:
1.
2.
3.
4.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Turn on your TV.
Be sure that your TV is set to view the correct video source (such as video 1 or video 2).
Press fn+f4 on your computer keyboard one or more times to display your computer screen on
your TV.
If you have not yet run the Setup Wizard, you do not need to perform the following procedure.
Open MediaSmart:
● From your Windows desktop, click Start, and then click HP MediaSmart.
– or –
●
Press the media button on the computer.
Click the TV icon on the SmartMenu.
Click the Settings icon, and then click TV Source.
Follow the on-screen instructions.
Adding a TV to your system 23