Maintenance - Makita BVC340 Instruction Manual

Emptying the dust bag
WARNING:
Always be sure that both the cleaner and a
•
connected power tool are switched off and the
battery cartridge is removed and
tool, if corded tool, is unplugged before
installing or removing the dust bag on the
cleaner and emptying the dust bag( made of
cloth). Failure to switch off, remove the battery
cartridge and unplug the connected power tool may
result in electric shock and serious personal injury.
When the dust bag is about half full, remove the
•
dust bag from the cleaner and pull the fastener out.
Empty the dust bag of its contents, tapping it lightly
so as to remove particles adhering to the insides
which might hamper further collection.
NOTE:
For the time to empty the dust bag, use a guide
•
line that the dust bag becomes full when
drilling about 450 holes with 6.5 mm diameter
and 40 mm depth on the concrete. A dust bag
clogged with the built up particles may reduce the
dust collection power and cause damage to the
cleaner motor..
CAUTION:
Attach the dust bag (made of cloth) to the dust
•
bag joint securely and close the fastener
completely before use. Failure to attach the dust
bag securely and close its fastener completely may
cause blow-out of dust and result in serious
personal injury.
Fig.12
Pick up the square section of the dust bag joint firmly,
turn it counterclockwise and then remove the dust bag.
Fig.13
Open the fastener and dispose of the dust.
CAUTION:
Remove all particles adhering to the fastener area.
•

MAINTENANCE

WARNING:
Always be sure that the cleaner is switched off and
•
the battery cartridge is removed before attempting
to perform inspection or maintenance.
Cleaning the filter area
CAUTION:
Do not pick up materials other than dust , such as
•
stone, wood chip and the like since this cleaner is
intended for dust collection. Picking up stone, wood
chip and the like may cause damage to the fan and
the cleaner.
Fig.14
Check and clean up the filter area in the suction inlet
regularly. Remove foreign objects which will obstruct
suction.
Cleaning
the power
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
These
•
recommended for use with your Makita cleaner
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Nozzles
•
Dust bags
•
Hoses
•
Front cuffs
•
Shoulder straps
•
Various type of Makita genuine batteries and
•
chargers
8
accessories or attachments
persons. Only use
are
accessory or