Makita BCL142 Instruction Manual
Hide thumbs Also See for BCL142:

Advertisement

INSTRUCTION MANUAL
Cordless Cleaner
BCL142
BCL182
011538
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Summary of Contents for Makita BCL142

  • Page 1 INSTRUCTION MANUAL Cordless Cleaner BCL142 BCL182 011538 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model BCL142 BCL182 with a dust bag 0.50 L Capacity with a paper pack 0.33 L HIGH Approx. 20 min. Continuous use Approx. 40 min. Overall length 986 mm 1,004 mm Net weight 1.3 kg Rated voltage D.C.
  • Page 3: Additional Safety Rules

    16. Children should be supervised to ensure that If electrolyte gets into your eyes, rinse them they do not play with the appliance. out with clear water and seek medical attention right away. It may result in loss of SAVE THESE INSTRUCTIONS. your eyesight.
  • Page 4: Functional Description

    Battery protection system FUNCTIONAL DESCRIPTION The cleaner is equipped with the protection system, which automatically cuts off the output power for its long CAUTION: service life. Always be sure that the tool is switched off and the • The cleaner stops during operation when the cleaner battery cartridge is removed before adjusting or and/or battery are placed under the following situation.
  • Page 5: Installing Dust Bag

    ASSEMBLY 1. Dust stopper CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Disposing of Dust 011552 CAUTION: Pull out both the orange-colored dust stopper and Empty the cleaner before it becomes too full, or the •...
  • Page 6 Place the dust stopper and the dust bag together 1. Dust stopper into the cleaner cavity in the same direction of 2. Groove arrow on the dust stopper. Insert them all the way 3. Dust bag into the slots in the cleaner cavity. 008935 Insert the protrusion of the dust bag into the groove in the dust stopper as shown in the figure.
  • Page 7: Operation

    Place the dust stopper and the dust pack together 1. Dust stopper into the cleaner cavity in the same direction of 2. Dust pack arrow on the dust stopper. Insert them all the way 3. Groove into the slots in the cleaner cavity. 008931 Insert the protrusion of the dust pack into the groove in the dust stopper as shown in the figure.
  • Page 8: Maintenance

    Cleaning (Suction) Cleaning without nozzle Nozzle You can pick up powder and dust without nozzle. Attach the nozzle to clean off tables, desks, furniture, etc. Nozzle slips on easily. 1. Nozzle 011565 MAINTENANCE 011544 Nozzle + Extension wand (Straight pipe) The extension wand fits in between the nozzle and the CAUTION: cleaner itself.
  • Page 9 008934 Wash the dust bag in soapy water when it is clogged with dust and the cleaner power becomes small. Dry it out thoroughly before use. An insufficiently dried bag may cause poor suction and shorten the service life of the motor.
  • Page 10 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Extension wand (Straight pipe) • Nozzle • Nozzle for carpet •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884986-220...

This manual is also suitable for:

Bcl182

Table of Contents