Usb Thumb Drive For Updating Inverter Software; Removing The Usb Stick - Fronius Symo Series Operating Instructions Manual

USB symbol on the inverter display, e.g., in the 'NOW' display mode:
Notice! Please be aware that in outdoor applications the USB thumb drive may
only function in a limited temperature range.
Make sure, for example, that the USB thumb drive will also function at low tem-
peratures for outdoor applications.
USB thumb drive
for updating in-
verter software
Removing the
Safety information for removing a USB stick
USB Stick
46
N O W
A C O u t p u t P o w e r
+
1
2 3
2
4 4
When the inverter recognizes a USB
thumb drive, the USB symbol will ap-
pear at the top right of the display.
When inserting the USB thumb drive,
make sure that the USB symbol is dis-
played (it may also be flashing).
The USB thumb drive can be used
even by end customers to update the
software of the inverter. The update
file is saved to the USB thumb drive
beforehand and transmitted from
there to the inverter, and the update
process is started through the Setup
menu.
5
IMPORTANT! To prevent a loss of
data, the connected USB stick
should only be removed under the
following conditions:
- via the SETUP and "Safely re-
move USB / hardware" menu
items
- when the "Data Transfer" LED is
no longer flashing or illuminated.