Inserting The Documentation Library Cd - Compaq 800c Getting Started Manual

266551-003.book Page 6 Thursday, February 20, 2003 11:33 AM
Beginning to Use the Notebook

Inserting the Documentation Library CD

1. Be sure the notebook is on.
2. Press the media release button 1 on the drive bezel to release
the media tray, then pull the tray outward until it is fully
extended 2.
3. Position the CD over the tray label side up.
4. Gently press the CD onto the tray spindle 3 until the CD
snaps into place. Handle the CD by the edges, not the flat
surfaces. (If the media tray is not fully extended, tilt the CD
to position it over the tray spindle, then press it downward
into position.)
5. Close the media tray.
Inserting the Documentation Library CD into a CD drive
2–6 Getting Started