INSTALLATION
CAUTION
Before installation, make sure the display arm or desk arm stand is strong enough
to hold the necessary weight of the monitor and the mount.
Panel angle adjustment range : 23° upward and 5° downward
< DISPLAY ARM OR DESK ARM STAND >
CAUTION
When you use with the display arm or desk arm stand, in consideration of thickness
of the mounting stage, tighten the M4 Screws (4pcs) with washer which "L" length is
8mm to fasten the monitor. Using the screw longer than this may cause electric shock
or damage because it may contact with the electrical parts inside the monitor.
Screw
Mounting Stage
L
5°
Chassis
BEFORE YOU OPERATE THE MONITOR 5
23°