Operating The Monitor - Iiyama ProLite XUB2893UHSU User Manual

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 27. You are also able to adjust the picture by following the button operation
shown below.
Press the ENTER Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the
highlight the desired adjustment icon.
Press the ENTER Button again. Use the
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for OSD vertical position, select "OSD" of Menu item and then press the
ENTER Button. Then, select "OSD Vertical Position" by using the
page appears after you press the ENTER Button.
Then, use the /
position should be changing accordingly while you are doing this.
Press the EXIT Button lastly and all changes are saved in the memory.
NOTE
 When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed. Also, press the EXIT button to quickly turn off the On-
Screen Display.
 Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
 All adjustments have only one setting which applies to all signal timings.
12 OPERATING THE MONITOR
Buttons to change the OSD vertical position settings. The OSD vertical
PICTURE ADJUST ON SCREEN DISPLAY SETTINGS
COLOR SETTINGS
OSD HORIZONTAL POSITION
OSD OSD VERTICAL POSITION
LANGUAGE OSD ROTATE
RECALL
OSD TIME
MISCELLANEOUS AFTER AC CUT
INPUT SELECT
AUDIO SETTINGS
/ Buttons.
/ Buttons to make the appropriate
/ Buttons. An adjustment
ProLite XUB2493QSU
0
OFF OFF
ON
/ Buttons to