Polaris RZR S 1000 2020 Owner's Manual page 54

FEATURES AND CONTROLS
ENGINE ERROR CODES
The error screen displays only when the CHECK ENGINE light is on or when it
goes on and off during one ignition cycle. Error codes are not stored. When the
key is turned OFF, the code and message is lost, but will reappear if the fault
reoccurs after restarting the engine.
If the CHECK ENGINE light illuminates, retrieve the error codes from the display.
q
Error Code # (0–9)
w
Suspect Parameter # (SPN)
e
Failure Mode Indicator (FMI)
1. If the error codes are not displayed, use the MODE button to toggle until "Ck
ENG" displays on the main line of the display.
2. Press and hold the MODE button to enter the diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock and odometer
displays.
4. Press the MODE button to advance to the next error code.
5. Press and hold the MODE button to exit the diagnostics code menu.
6. Your authorized POLARIS dealer or qualified person can provide code
details and diagnosis.
52
Downloaded from ManualsNet.com search engine