Polaris RZR S 1000 2020 Owner's Manual page 138

MAINTENANCE
3. Remove the clutch cover screws and open the clutch cover. (It does not have
to be removed from the vehicle.) Remove all debris wrapped in and around
the PVT system.
Use the shock/clutch tool from the tool kit to slightly open the sheaves to aid in
Insert hooked end of tool
4. Remove ALL DEBRIS from the entire clutch air duct passage
5. Check for signs of damage to seals on the transmission and engine. See
your dealer promptly for service if any seals appear to be damaged.
Belt slip is responsible for creating excessive heat that destroys belts, wears
clutch components and causes outer clutch covers to fail. Switch to low range
while operating at slower speeds to extend the life of the PVT components
136
Downloaded from ManualsNet.com
TIP
debris removal and belt installation.
TIP
(belt, cover, etc.).
search engine
Apply force to opposite end of tool
to spread sheaves
w
.